Liquid Pressure Transmitter
Description
UPB2S liquid pressure transmitter measures pressure through its front complete flush diaphragm. By means of welding method, the isolated diaphragm of the transmitter is welded on the front end of process interface. The complete flush diaphragm is used to prevent fouling, unsanitary and blocking of viscous liquids, which can make the performance of this liquid pressure transmitter better.
Features
▲Flush membrane structure without input pressure hole & cavity
▲High accuracy high strength, sanitary type, against fouling, dimensions can be customized.
▲The isolated diaphragm of the transmitter is welded
Specifications
| pressure ranges | -1...0~0.1...350bar |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V |
| accuracy | 0.25%FS(standard) ,0.5%FS |
| load resistance | RL=(U-12V)/0.02A(4~20mA current output) U—loop voltage (V) |
| supply voltage | 12~36VDC |
| measured media temperature range | -40~+125℃ (max. up to 150℃ if made with heat sink) |
| process connection | G1/2 or others |
| electrical connection | hirschmann connector or others |
| material of wetted part and wetted part | 304SS |
Application
UPB2S liquid pressure transmitter is widely used in sanitary industry for pressure measurement like food, medicine, and wine industry etc.
