Flush Diaphragm Pressure Transmitter
Description of flush diaphragm pressure transmitter
UPB2 flush diaphragm pressure transmitter uses piezoresistive silicon chip as sensing element. UPB2 has clamping type, G1/2 thread type, and flange type for options. Its output signal can be made standard voltage output signal or current output signal.
UPB2 flush diaphragm pressure transmitter is made with flush membrane structure, it has good ability on preventing fouling, crystallization and jamming of thick liquids.
UPB2 flush diaphragm pressure transmitter is widely used in food, medicine, health and wine industry etc.
Features of flush diaphragm pressure transmitter
◆Pressure ranges: -1...0~0.4...400bar
◆Flush membrane structure without input pressure hole & cavity
◆Automatic testing and laser trimming compensating
◆High accuracy high strength, sanitary type, against fouling, dimensions can be customized.
◆Has different output signals
◆Pressure type: gauge pressure, absolute pressure, sealed gauge pressure
Specifications of flush diaphragm pressure transmitter
| pressure medium | gas or liquid compatible with stainless steel |
| pressure ranges | -1...0~0.4...400bar |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V |
| accuracy | 0.25%FS, 0.5%FS(standard) |
| load resistance | RL =(U-12V)/0.02A(4~20mA current output) U—loop voltage (V) |
| long-term stability | <0.2%FS/year |
| supply voltage | 12~36VDC |
| compensated temperature range | -10~70℃ |
| operating temperature range | -30~+85℃ |
| measured media temperature range | -40~+100℃ |
| temperature coefficient of zero | 0.2%FS/10℃ |
| temperature coefficient of span | 0.2%FS/10℃ |
| insulation resistance | 100MΩ@50VDC |
| process connection | G1/2 or others |
| electrical connection | hirschmann connector or others |
| material of wetted part | 1Cr18Ni9Ti stainless steel |
| material of pressure membrane | 316L stainless steel |
| material of housing | 1Cr18Ni9Ti stainless steel |
| sealing | n-Butyronitrile or fluoro-rubber sealing ring |
