water pressure sensor
Description of water pressure sensor
Based advanced ion implantation and micro-mechanical processing technology, UPX18 TO-8 housing piezoresistive water pressure sensor is manufactured based on silicon chip which has Wheatstone Bridges and precise mechanical structure. The measured pressure acts on silicon chip through pressure port directly, and the pressure value is transformed to output voltage signal in linearityrelationship.
UPX18 water pressure sensor is suitable for installation in small space, and compatible for non-conductive & non-corrosive liquid or dry gas gauge pressure, absolute pressure or differential pressure measurement.
UPX18 water pressure sensor has been widely used for air pressure control, physiology guarding, medicine equipment, blood-pressure meter etc.
Features of water pressure sensor
◆Gauge, absolute and differential pressure;
◆Suitable for measurement of non-conductive & non-corrosive media;
◆TO8 packing, enable for PCB installation;
◆Low cost, small size
Specifications of water pressure sensor
|pressure medium||non-conductive & non-corrosive gas or liquid|
|pressure ranges||0~0.01...10 bar|
|pressure type||gauge(G), absolute(A), sealed gauge(S)|
|compensated temperature range||0~+50℃|
|operating temperature range||-20~+85℃|
|storage temperature range||-40~+125℃|
|temperature coefficient of zero||0.25%FS/10℃|
|temperature coefficient of span||0.2%FS/10℃|
|electrical connection||6 pin(gold coated kovar wires)|
|position effect||deviate 90°at any direction, zero change≤0.05%FS|
|net weight||about 4g|