Submersible Level Transmitter
ULB6 submersible liquid level transmitter is made from stainless steel with rigid and robust construction. The protection cap with a small hole not only protect the diaphragm, but also let the liquids contact the diaphragm freely.
The exquisite sealing technology as well as good assembly techniques guarantee ULB6 submersible level transmitter's outstanding quality & performance. The product has a waterproof cable with vent hose which is designed for submersible applications.
ULB6 submersible liquid level transmitter is designed with IP68 protection, it is widely applied in petroleum, chemical industry, medicine, metallurgy, hydrology exploration etc.
Housing Housing and cable
◆Rigid and robust construction, IP68 protection.
◆Wide application scope,long service life.
◆Reversed polarity protection and current limiting protection.
◆ Against thunder stroke, against radio-frequency interference.
◆PUR, NBR, PE or PTFE cable for options.
|output signal||4~20mA, 0~5V, 0~10V, 1~5V|
|load resistance||RL=(U-12V)/0.02A U—loop voltage（V）|
|compensated temperature range||-10~70℃|
|storage temperature range||-40~100℃|
|temperature coefficient of zero||0.2%FS/10℃|
|temperature coefficient of span||0.2%FS/10℃|
|electrical connection||Φ7.2mm shielded cable with vent hose|
|material of wetted part and housing||1Cr18Ni9Ti|
|material of pressure membrane||316L or tantalum|
|sealing||nitrile-butadiene rubber(standard) or fluoro-rubber sealing ring|