Submersible L-evel Sensor/Transducer
Description of submersible level sensor/transducer
UPC6 submersible level transducer is a fully sealed transducer with stainless steel housing, and constructed by gauge pressure sensor with high accuracy and high reliability. The stainless steel cap on the housing top not only protect the pressure diaphragm , but also cause the fluid to contact diaphragm freely.
Using high quality sensor, exquisite sealing technology as well as assembly techniques have guaranteed this product's outstanding quality and performance.
Features of submersible level sensor/transducer
●Fully sealed structure;
●Stable performance, good long-term stability;
●Submerible measurement type;
●Cable connection, good ability of oil resistant, water resistant
Specifications of submersible level sensor/transducer
| pressure medium | gas or liquid compatible to stainless steel |
| measuring ranges | 0~1mH2O...200mH2O |
| measuring mode | submerible |
| overload pressure | 150%FS |
| output signal | ≥70mV |
| accuracy | 0.25%FS(standard), 0.5%FS |
| zero offset | ≤±2mV |
| long-term stability | <0.5%FS/year |
| excitation | 1.5mA or 5V DC |
| compensated temperature range | -10~+70℃ |
| operating temperature range | -30~100℃ |
| storage temperature range | -40~100℃ |
| temperature coefficient of zero | 0.2%FS/10℃ |
| temperature coefficient of span | 0.2%FS/10℃ |
| input/output resistance | 2~6kΩ |
| insulation resistance | 100MΩ@50VDC |
| electrical connection | Φ7.2mm PUR shielded cable with vent hose |
| material of wetted part | 1Cr18Ni9Ti |
| material of pressure membrane | 316L |
| material of housing | 1Cr18Ni9ti |
| sealing | nitrile-butadiene rubber(standard) or fluoro-rubber sealing ring |
| protection | IP68 |