Stainless Steel Level Transmitter
ULB6 stainless steel level transmitter is made from stainless steel with rigid and robust construction. The protection cap with a small hole not only protect the diaphragm, but also let the liquids contact the diaphragm freely. The exquisite sealing technology as well as good assembly techniques guarantee ULB6 level transmitter's outstanding quality & performance. The product has a waterproof cable with vent hose which is designed for submersible applications.
The standard diameter of ULB6 stainless steel level transmitter is 27mm, but we can make it to be 19mm for the option.
●All welded construction, 19mm diameter, IP68 protection.
●Reversed polarity protection and current limiting protection.
●Against thunder stroke, against radio-frequency interference.
●PUR, NBR, PE or PTFE cable for options.
●Wide application scope,long service life.
●Diameter of sensor: 19mm.
|output signal||4~20mA, 0~5V, 0~10V, 1~5V|
|load resistance||RL =(U-12V)/0.02A(4~20mA current output) U—loop voltage(V)|
|compensated temperature range||-10~70℃|
|storage temperature range||-40~100℃|
|temperature coefficient of zero||0.2%FS/10℃|
|temperature coefficient of span||0.2%FS/10℃|
|electrical connection||Φ7.2mm shielded cable with vent hose|
|material of wetted part and housing||1Cr18Ni9Ti|
|material of pressure membrane||316L or tantalum|
|sealing||nitrile-butadiene rubber(standard) or fluoro-rubber sealing ring|
ULB6 stainless steel level transmitter is designed with IP68 protection, it is widely applied in petroleum, chemical industry, medicine, metallurgy, hydrology exploration etc.